Character
  Func
  Spec
  Steps
  Cont
  Comp
 
      Ubiquitous Trainer Series  
      Bluetooth trainer Series  
    - Wireless Embedded Training
        System
    - Bluetooth Telecom Trainer
    - Bluetooth Basic/Development
        Kit
    - Bluetooth Embedded Headset
        Kit
    Microwave trainer Series
    Antenna trainer Series
    Mobile Telecom trainer Series
    RFID Trainer Series
    Commerial products
 
 
 
 
     
  BT-1000 > Product > HOME  
 
               
 
 
     
 
  ▒  Characteristics
 
               
   

· Bluetooth module featuring for various application of software.
· Module replacement type capable of supporting multi application development by turning
  Bluetooth chipset module into daughter-board
· Supporting various power supply types ? able to select preferred type per each application
· Featuring all interfaces supported by Bluetooth chipset (UART/ USB/ SPI/ Parallel)
· Hardware for voice support application (ear-microphone jack)
· Li-Ion battery recharging available (USB/Adaptor)
· Selection of hardware I/O port per different user available
· Hardware testing possible with test pin insert
· LED available for the status of each I/O
· Bluetooth protocol signaling chart available for application program development
  (Host/Embedded)
· Embedded Programming is available using BlueLab SDK.

   
     
 
  ▒  Featured Functions
 
               
   

· Bluetooth development tool
· Embedded Programming available using BlueLab SDK.
· Voice communication (Headset profile)
· Data communication (FTP profile)
· Hardware check using test pin
· Li-Ion battery recharging (Adaptor, USB)
· Selection of various power supply types (Adaptor/ Battery/ USB)
· Selection of power (Button/ Slide switch)
· Selective use of Bluetooth module I/O
· LED indication for Bluetooth module I/O
· Interface selection between host and host controller communication (External Support)

    
     
 
  ▒  Specifications
 
               
   

· Objective : Supporting product development with Bluetooth technology.
· Developing Environment: PC, firmware based.
· Hardware specifications
  - Bluetooth Core chip : CSR BlueCore02-External
  - Bluetooth module : Bluetooth Spec V1.1 Module (BlueSEM II , Class 2)
  - Board Size : 190 x 160 x 60 [mm]
  - Interface : USB / UART / SPI
  - Power Supply : USB / Adaptor(9 [V], 300 [mA]) / Battery(4.2 [V], 100 [mAH])
  - Others : LED, Ear-microphone, I/O Connector, Parallel port
  - Selectable I/O : 10 [EA]
  - Selectable Button : 6 [EA]
  - Test Point : 23 Points
· Software
  - Application Signaling Documents : Headset, Audio-gateway, Hands-free, FTP
  - Demonstration program : Voice, Chatting, File Transfer
  - HCI Command Test Program : Using USB interface

    
     
 
  ▒  Contents (Recommended)
 
               
   

Experiment 1. Introduction to Bluetooth Technology
Experiment 2. Program installation and instruction
  - Demonstration : Chatting, Voice comm., FTP(File Transfer Protocol)
Experiment 3. Interface setup (UART, USB, SPI)
Experiment 4. Introduction to Hardware circuit
Experiment 5. Hardware measurements I
  - PCM Codec comm.
  - Data communication
Experiment 6. Hardware measurements II
  - Radio frequency energy spectrum
  - Power supply method (Battery, USB, Adaptor)
Experiment 7. Signaling process I
Experiment 8. Signaling process II
Experiment 9. Application Experiment I
  - Input and output port control.
  - Encrypted file transfer
Experiment 10. Application Experiment II
  - Communication using Headset and Audio gateway
Experiment 11. Application Experiment III
  - Network Communication between Bluetooth Device. (Piconet Experiment)

   
     
 
  ▒  Components
 
               
     

· Main Body : 2 [units]
· Demo CD : 1 [EA]
· User Manual : 1 [EA]
· USB Cable : 2 [EA]
· UART Cable : 2 [EA]
· SPI Cable : 1 [EA]
· Adaptor : 2 [EA]
· Ear-microphone : 2 [EA]
· Audio Cable : 1 [EA]
· Packing Box : 1 [EA]

     
               
 
   
    GO☞ EXQ